care instructions

HighTek Metal Label

Poly furniture is made from High-Density Polyethylene (HDPE), a recycled plastic that will never need to be painted or stained. It will not rot or splinter, and it contains an added UV protective agent to resist fading. Poly furniture is not affected by most corrosive substances and will not promote bacterial growth.

 

To maintain the beauty of your furniture, clean it regularly with generic composite deck cleaner which can be bought at Lowes or Home Depot or a non-abrasive soap and water. Do not use bleach on any color other than white. While most colors need to be cleaned only several times per year using soap and water, certain colors such as white, (but not limited to this color) need to be cleaned frequently to maintain its original beauty. In extreme situations and with colors such as white, spray the furniture thoroughly with a non-abrasive cleaner, then scrub the furniture using a soft=bristled brush and rinse off with warm clean water. If needed, spray the furniture with a non-abrasive cleaner and was it using a pressure washer, not exceeding 1,500 PSI. Do not place the tip of your pressure washer closer than 8″ to 12″ from the furniture, or it will tear into the material.

 

Do not place flower pots or any items on the furniture that will leave stains. Do not place hot items directly onto the furniture to avoid melting. 

 

All fasteners on furniture manufactured by HighTek Outdoor Living LLC are stainless steel. Stainless steel is one of the most corrosive resistant. However, in extreme conditions such as coastal areas, while stainless steel will be less likely to rust, it is still recommended to regularly rinse it with fresh water to ensure the longevity of your furniture and fasteners. 

 

If properly cared for, you will be able to relax in your fine piece of poly furniture for many years!

LIFETIME LIMITED WARRANTY


HIGHTEK, LLC (hereinafter referred to as HIGHTEK) manufacturer of HIGHTEK outdoor products, warrants to the original purchaser that each unit is free from manufacturing defects. This warranty applies to the lifetime of the product(s) under normal residential use and service, subject to the limitations listed as long as the original purchaser retains ownership of the HIGHTEK products. If HIGHTEK products are used at or as part of a commercial business, refer to the commercial applications section of this warranty.

This warranty covers only manufacturing and material defects as specified herein and does not include damages caused by improper use; normal weathering; accident, fire, flood, acts of nature, vandalism, riot, or civil disorder; acts of terrorism or war; misuse; abuse by harmful fumes, vapors, solvents, chemicals, or chemical pollutants in the atmosphere; mildew; stresses resulting from localized heat that causes excessive temperature differentials; or incidents beyond HIGHTEK’S control.

 

HDPE MATERIAL – LIFETIME WARRANTY

HIGHTEK warrants to original purchaser that the HDPE poly material will not crack, or splinter with regular use for the lifetime of the product. Color fading is not covered under warranty, but all HIGHTEK HDPE material contains an UV additive to help resist fading. With direct exposure to the sun, colors will fade over time. All warranty claims must be made through original HIGHTEK dealer and require photographic proof of manufacturing defect.

 

HARDWARE – LIFETIME WARRANTY

HIGHTEK warrants to original purchaser that screws, hinges and motion mechanisms used on HIGHTEK outdoor furniture is guaranteed for the lifetime of the product. All warranty claims must be made through original HIGHTEK dealer and require photographic proof of manufacturing defect.

 

NON-TRANSFERABLE WARRANTY

This HIGHTEK warranty is non-transferable, and is only valid to original purchaser.

 

REPAIR

If an inspection indicates that the claim is valid in accordance with the provisions of this warranty, HIGHTEK agrees, at its option, to repair or replace any defective part or component as warranted herein, free of charge to the warranty holder, when said defective part or component is returned to HIGHTEK. The warranty holder shall pay return transportation charges.

 

LABOR

Labor costs are not included in this warranty. Neither HIGHTEK nor its dealers will be responsible for any costs incurred in the removal, replacement, installation, or reinstallation of any product or part furnished by HIGHTEK under this warranty.

 

COMMERCIAL APPLICATIONS

If HIGHTEK products are used as part of a commercial enterprise or application, warranty coverage on HDPE material and hardware is limited to five (5) years.

 

PRODUCT CHANGES

HIGHTEK reserves the right to change or discontinue any product it manufactures. If a warranted replacement part or component of the product originally manufactured is not available, HIGHTEK shall have the right to substitute a part or component determined by HIGHTEK to be of equal quality and price.

 

OTHER CONSIDERATIONS

The warranty statements contained in this certificate set forth the only express warranties extended by HIGHTEK and the provisions herein shall constitute the warranty holder’s exclusive remedy. This limited warranty gives specific legal rights. There may be other rights which may vary from state to state.

 

HIGHTEK OUTDOOR
4210 KINSMAN RD NW
N BLOOMFIELD, OH 44450

This will close in 0 seconds